TOUCH BUILDER GEL is a camouflage three-phase builder gel with a medium consistency and high hardness. Thanks to its balanced viscosity, it is easily self-leveling, making it ideal for nail modeling, holding the arch perfectly, and preventing shrinkage even on long nails. The material is versatile: it is suitable for the "no-file" technique or can be easily filed without clogging the nail file.

The gel is multi-functional — perfect for modeling, strengthening, length restoration, extension on dual forms (upper forms), and creating 3D designs. It is available in 37 classic nude shades of medium pigmentation in 10 ml and 30 ml volumes (without a brush). The 10 ml format is convenient for testing new shades and for beginner technicians.

Advantages of TOUCH BUILDER GEL:

• medium consistency, leaning towards thick;
• high hardness for durable structures;
• fast application and self-leveling;
• does not burn in the lamp — comfortable polymerization;
• does not crumble during filing;
• holds the arch well and does not shrink on long nails;
• can be pinched at 15 seconds;
• medium pigmentation masks imperfections;
• versatile: strengthening, extensions, repairs, 3D designs.

Advantages of the 10 ml format:

• more shades — more opportunities for clients;
• convenience of testing without the risk of leftovers;
• budget savings — no need to buy large volumes at once;
• ideal for the start of beginner technicians.

Step-by-step application:

Preparation of the nail plate:

1. Surface buffing with a 180-grit file.
2. Degreasing the nail plate with >Fresher.
3. Applying a dehydrator.
4. Applying ultrabond/primer with a semi-dry brush to the end of the nail, without touching the skin.

Creation of the base layer:

1. Apply Smart Rubber Base in a thin layer.
2. Cure in the lamp for 60 seconds.
3. Remove the sticky layer of Smart Rubber Base.

Modeling: perform extensions or strengthening of the nail plate.

Important features:

• when strengthening, be sure to file out the natural nail from the inside;
• shape filing should be done after the material is applied.

Application thickness:

When strengthening the middle of the nail — 0.5–0.7 mm.

When strengthening the entire nail or extending:

• distance from the cuticle — 1 mm;
• apex — 1 mm;
• free edge — 0.7–1 mm.

Curing time: in a 48W LED lamp — 60–120 seconds.

Ingredients (INCI): Acrylates Copolymer, Isobornyl Methacrylate, Silica, Hydroxycyclohexyl Phenyl Ketone. May contain: CI 77891, CI 14700, CI 47000, CI 42090, CI 60730, CI 15510, CI 77499.

TOUCH BUILDER GEL — universal working material for technicians of any level. The combination of strength, self-leveling, and comfortable polymerization makes it ideal for creating long-lasting coatings with flawless architecture.