2 x base filter/foam filter/filter for tumble dryer/heat pump dryer - for Miele 9164761

Features:

• Box contents: 2 base filters approx. 207 mm x 155 mm, height approx. 30 mm
• Perfect fit for part number for Miele 9164761 replaces 9164760
• Description: this filter is mounted directly in front of the heat exchanger of the tumble dryer to filter lint, so that the heat exchanger does not clog with it, ensuring a longer service life of the dryer
• Easy to replace: the filter, which is made of foam, can be washed out again and again under running water, but if the foam filter is broken, it should be replaced immediately so that less lint comes into the heat exchanger for a longer service life of the tumble dryer
• If you are unsure, please contact the seller using the device data (E-no.) - these can be found on the nameplate of your device

Details: Foam filter. For manufacturers: Miele. For devices: Foam filter / base filter. Tumble dryer, heat pump dryer. With heat exchanger. Item Name: Foam filter / replacement filter / foam filter / filter mat / sponge filter. For part number: Miele. 9164761. Replaces 9164760. Additional information: Size: Approx. 207 mm x 155 mm, height approx. 30 mm. Can also be cut to size if required. 2 large holes (approx. 24 mm diameter) and a smaller hole at the top side (approx. 5 mm diameter) are available to mount them in the bracket before the heat exchanger. Function: This filter is mounted directly before the heat exchanger of the tumble dryer to filter lint so that the heat exchanger does not clog up with it. This ensures a longer service life of the dryer. Replacement: The filter, which is made of foam, can be washed out again and again under running water. However, if the foam filter is broken, it should be replaced immediately so that fewer lint comes into the heat exchanger for a longer life of the tumble dryer. Open the flap before heat exchange (at the bottom of the base - often recess in the flap to press on) - this jumps out on the base filter on the handle. You can then remove the foam filter from the handle rod – so you can clean the filter or replace the filter. You can learn more in the instructions of your device. Box contents: 2 x foam filters. In case of uncertainty, please contact the seller before using the device data - these can be found on the name plate of your device when you open the door.

EAN: 4050535020758

Package Dimensions: 12.5 x 6.7 x 2.7 inches

Part Number: 773924761